Control and locking systems

Wireless control panel BEDiX

With the wireless operation panel, you will be able to choose the kind of operating system and to put together the operating parameters up to six installations. Its use will be limited by a password in order to prevent an unauthorized use. The BEDiX system can be placed on a wall bracket or in the most convenient place for the user.

Key control panel C-BEDiX

It is connected by a cable CAN-BUS and, for its assembly in a central control panel, a key programmer with fixed cable can be used. Optionally, a combi C-Bendix can be added for its activation by key.

Remote control F-Key

It’s so small that it can be placed on a keychain. And the following functions can be programmed: key, free (switching off the system), automatic or night mode. A command can be registered with different installations.

Bluetooth (BT)

It is possible to use a Bluetooth communication system to operate the door. It has 2.4 GHz bandwidth, 10 m coverage and, being a R&D standardized communication system, it allows that a phone, a PDA or another electronic device including Bluetooth could operate the different door modes with its key access.

Door management by a technical building system (BMS)

Allows that smart or automated buildings could transmit orders from its central processor to the door through the CAN-BUS of the SLX door. For example, through a computer to an Interface EIB, a UAPI and a SLX.

Door management by a technical system of the building (BMS)

Allows that smart or automated buildings could transmit orders from its central processor to the door through the CAN-BUS of the SLX door. For example, through a computer to an Interface EIB, a UAPI and a SLX.

A very important function to centralize the operation of the modern buildings, because it allows a total control on the automatic doors in terms of operation, mode and programming.